Jaw crusher
A wide range of sizes for your application, from table-top devices to holding piece sizes up to 240 mm
If you want to save a processing step in sample preparation in the laboratory, our jaw crushers with integrated divider are ideal for this. With our wide range of sizes, we are sure to have the right design for your application.
Areas of application for our jaw crushers
Jaw crushers are used for coarse crushing of brittle, medium-hard to hard materials up to a Mohs hardness of approx. 8.5. Depending on the model, crushing ratios of up to 1:200 are possible.
Our jaw crushers are available in two versions: our laboratory version with integrated control, feed chute and collection container and a version for installation in plants. For the latter, the feed chute, collection container and control unit are omitted.
Crushing & Milling in the jaw crusher takes place in a wedge-shaped crushing chamber between a fixed and a movable crushing jaw. All of our devices impress with many features that make your work easier.
High final fineness of up to 90% < 1 mm
Depending on the crusher size, material and set crushing gap, crushing ratios of up to 1:200 can be achieved.
The final fineness obtained is largely determined by the set discharge gap, the stroke and the shredding behavior of the material.
Fixed crushing jaw, which is designed as a door
This enables the crushing chamber to be opened quickly without tools for cleaning, removal of impurities and full inspection of wear on the crusher jaws and side wear plates.
Infinitely adjustable crushing gap
This can be read off via a scale on the housing or in the app. The zero point can be readjusted via the app and on the scale if the crushing jaws are worn.
Innovative app control
Standard Operating Procedures (SOP)
Display of the set gap width
Calling up the operating instructions
Direct spare parts inquiry
Sample/machine data can be exported as a csv file
Updateable app and firmware
Reversible overload protection
From size EB 100×80-L
Crushing jaws can be rotated by 180
This doubles the service life of the crusher jaws, as the main wear usually occurs in the area of the smallest crushing gap.
Suction connection
Via connection flange in the non-intrusive feed chute.
Low-maintenance and lubricant-free Crushing & Milling
With the sealed and lifetime-lubricated bearings up to size EB 200×125-L.
Low-contamination Crushing & Milling with crushing jaws made of
Hard cast steel, stainless steel, tungsten carbide or zirconium oxide
Optionally available base frames
for driving under the jaw crusher with pallet truck/forklift truck
Turntable with 5 containers
to divide the sample quantity into 3 times 1:4 and 2 times 1:8
Jaw crusher: EB 50x40-L, EB 100x80-L, EB 150x100-L, EB 200x125-L, EB 300x250-L;
Dimensions with door closed (W × H × D) mm: 325 × 630 × 620, 470 × 951 × 773, 615 × 1150 × 938, 663 × 1340 × 1142, 972 × 1874 × 1717;
Weight kg: 95, 250, 380, 787, 2255;
Drive power kW: 1.1, 2.2, 4, 7.5, 18.5;
Jaw width mm: 50 × 40, 100 × 80, 150 × 100, 200 × 125, 300 × 250;
Stroke in discharge gap (min.) mm: 0.5, 1.2, 1.4, 1.4, 2.0;
Discharge gap mm: 0 – 10, 0 – 12, 0 – 15, 0 – 32, 0 – 30;
Max. feed unit size for individual infeed mm: 30, 70, 90, 110, 240;
Throughput rate kg/h: 10 – 50, 50 – 350, 75 – 500, 250 – 2000, 400 – 3500;
Collection container volume dm³: 0.5, 5, 9, 20, 33;
Operating voltage: 400 V, 3/N/PE, 50 Hz
Jaw crusher with integrated divider: EB 100x80-TL, EB 150x100-TL, EB 200x125-TL;
Dimensions (W × H × D) mm: 730 × 1315 × 978, 730 × 1451 × 978, 790 × 1696 × 1300;
Weight kg: 445, 550, 1150;
Drive power kW: 2.2 & 0.25, 4 & 0.25, 7.5 & 0.25;
Collection container volume, cumulative dm³: 7, 7, 12;
