Compression and Bending Testing Machine MEGA 6-2000-300 SD
● accuracy acc. to DIN EN ISO 7500-1, EN 12390-4, class 1 – straintest execution
● for compressive strength tests on material samples especially acc. to EN 12390-3, EN 12504-2, EN 206
● for bending strength tests on material samples especially acc. to EN 12390-5, EN 1339, EN 1341
● with accessories / options also for tests acc. to EN 1340, EN 1343 as well as compressive strengths on cement and mortar acc. to EN 196 / EN 1015
Compact Base UB 03-C40
● machine base with lateral housing for the display / controller for 2 test cylinders
● modular design for the extension up to 4 machine frames
● electric multi-piston hydraulic pump mounted in the oil tank
● microfilter
● servo valve
● pressure control valve
● electrical control
● electric supply: 3x 400 V, 50 Hz, 2.2 kW
● automatic load increase by digital controller DIGIMAXX® C-40 with servo valve in closed loop system with nominal-actual value comparison
Technical Data – Compression Test
● test load max.: 2000 kN
● piston stroke: 100 mm
● upper pressure plate: Ø 320 mm
● lower pressure plate: Ø 300 mm
● hardness of pressure plates: 53 HRC
● test area height: 340 mm
● inner width of test frame: 355 x 255 mm
● measuring range: 20.00... 2000 kN
● display area: 0... 3000 kN
● force measurement via electronic liquid pressure transducer
Technical Data – Bending Test
● test load max.: 300 kN
● piston stroke: 220 mm
● test area height: 220 mm
● length of bending roller: 510 mm
● bending roller Ø: 40 mm
● bending roller distance: 80... 900 mm
● measuring range: 3.00... 300 kN
● display area: 0... 300 kN
● force measurement via electronic load cell insensitive to shear forces
Technical Data – Digital Controller
● capacitive and robust 7” touch display
● PID-controller with DSP processor
● modular system with expansion options up to 8 control and measuring channels – 18 Bit
● measuring- and control cycle 2 kHz
● transmission of measured value up to 1 kHz
● freely programmable test sequences
● real-time display of the measuring channels as well as of the specimen strengths and test speed
● authorization model with different role and access authorizations (tester, laboratory manager, service technician, administrator)
● automatic and manually zero-adjustment
● adjustable break detection
● adjustable piston back-travel time
● specimen storage for test results
● 6 digital inputs galvanically isolated
● 9 potential-free relay outputs
● USB port for data export
● Ethernet connection for communication with PC software
Accessories and Options:
● larger (higher) test area
● larger pressure plates
dimensions 320 x 320 x 75 mm
dimensions 320 x 420 x 75 mm
dimensions 320 x 520 x 75 mm
A) insert for 4-point loading
B) splitting tensile strength device - EN 1338
C) compression die for curbstones - EN 1340
D) set of pressure plates with floating axle (Ø 230 x 40 mm)
E) compression device DV 600 AZ (only applicable in connection with set of pressure plates)
● electronic piston stroke measuring and control equipment
● test software PROTEUSMT
Available with following test loads:
● for compression test:
2000 and 3000 kN
● for bending test:
100, 200 and 300 kN
